🖥️. Single Board Computers
7 Review
Only for Raspberry Pi 4 Model B. Ice Tower Structure;Easy to setup. Super Cool fan background light (Multicolor). Rated power 0.4W @5V, 0.08A;DC 5V Power in (Can be powered by the Raspberry Pi). Package Includes:1 x 5-Layer Acrylic case,1 x 4010 Fan kit(screws and nuts),1 x mini screw driver,1 x Anti-slipper pads,1 x Ice Tower radiator and Fan, 2 x…
Read more about this product
7 Review
✔️The weather station uses the ESP8266-12E to obtain data from the Internet: time of a city, weather data and forecast information for the next 3 days, scrolling on the 1306 OLED Display; the device can switch to display data from any city in the world - maybe your relatives or friends live there. ✔️The device uses sensors DHT11, BMP180,BH1750FVI to…
Read more about this product
7 Review
✔️Solderless breadboard is convenient for the prototypes and circuit design experiment and other DIY projects. Perfect for Arduino, Raspberry Pi, and other programming boards. ✔️Easy to use: the breadboard is made of ABS plastic, each row and columns has corresponding letters and numbers, reduce the mistake handling. ✔️Self-adhesive back tape makes it…
Read more about this product
7 Review
Wide Application --- The new 8-layers cluster case is designed for Raspberry Pi clusters, Raspberry Pi NAS servers, Jetson Nano clusters, and disk array clusters to to provide shell protection and cooling solutions. It’s compatible with Raspberry Pi4B/3B+/3B/2B/B+, 2.5MM HDD, Jetson Nano (Note: Not for Raspberry Pi Zero). Better Cooling Effect --- With…
Read more about this product
7 Review
USB to I2C interface with a built-in graphical display. I2C master, passive monitor and capture-to-PC supported at 400 kHz. Three I2C ports, each with high-quality color coded hookup jumpers. Power monitoring: USB line voltage and target current readouts. Flexible control: GUI, command-line, C/C++, and Python 2/3 host software provided for Windows, Mac…
Read more about this product
7 Review
Connect SD card with your Raspberry Pi via the Micro-B USB port or the USB 5-Pin pin header connector. Support 2TB UHS-1(104 MB/s) and SD spec V 3.0 SDXC (Secure Digital eXtended Capacity). Includes Multi-Pi mounting accessory of standoff, nuts, and screws. No device driver installation is required. Fully RoHS compliant. High quality product, Made in…
Read more about this product
7 Review
✔️3220 Test Points, 4 Binding Posts,Blue aluminum plate,ABS Plastic housing, Copper contact clips;. ✔️7 Power Lanes, Tie-point 700; 4 Double Strips, Tie-point 2520;. ✔️Clear Red/blue line and number mark; Accept wire with diameter 20-29AWG;. ✔️Binding Posts Coded Black, Red, Yellow and Green, Coloured coordinates for easy component placement. ✔️Perfect…
Read more about this product
7 Review
Includes The Only Official Arduino Starter Kit From Arduino, The Best Selling Book From Make Magazine: Getting Started with Arduino: The Open Source Electronics Prototyping Platform and a Handy Uno R3 PIN-OUT Chart from Speed Kits. Includes Book, Make: Getting Started with Arduino: The Open Source Electronics Prototyping Platform Paperback. Includes…
Read more about this product
7 Review
The set-top box kit can enable your Raspberry Pi 4B to connect to the Raspberry Pi using a standard HDMI cable, and provides a good acrylic shell protection. Only expansion board, ASIN B08FLVJ19C. The 4010 blue LED light fan and all aluminum heat sink provide good heat dissipation for your Raspberry Pi;Compatible with standard HDMI cables. How enable…
Read more about this product
7 Review
IR Infrared Obstacle Avoidance Sensor Module can be widely used in robot obstacle avoidance, obstacle avoidance car, line count, and black and white line tracking and so on. the module detects the distance 2 ~ 30cm, detection angle 35 °, the distance can detect potential is adjusted. The output port OUT sensor module can be directly connected to the…
Read more about this product
7 Review
It is a Downloader for ESP-WROOM-32 ESP-32 WIFI Wireless Module.It has output all GPIO ports for user debugging. There are many different versions of CH340 driver software on the market, users can choose versions according to their own computer version, download and install by themselves. The USB to TTL converter is a tool to be used and needs to be…
Read more about this product
7 Review
【Updated Starter Kit for Raspberry Pi】This is a updated Assembled starter kit for for Raspberry Pi 4B/3B+/3B/2B/B+, including GPIO Adapter Board with Wiring Diagram Card, 40pin GPIO Rainbow Fat Cable, 830 Tie Points Solderless Breadboard and 65pcs Jumper Wire. 【GPIO Adapter Board with Wiring Diagram Card】You can connect much version raspberry of the…
Read more about this product
7 Review
SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc. Ultra low power consumption, basically power is only required for refreshing. Onboard voltage translator, compatible with 3.3V/5V MCUs. Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32). No backlight, keeps displaying last…
Read more about this product
7 Review
Support for the Arduino IDE 1.0+ (OSX/Win/Linux). Power via USB or External Source - 5v or 7-35v (automatic selection). On-board 500ma 5V Regulator. 6 I/O Pins (2 are used for USB only if your program actively communicates over USB. Brand new and high quality.
7 Review
✔ X850 V3.1 mSATA SSD expansion board provides an ideal storage solution for raspberry pi or ROCK64 board, It only supports mSATA Interface SSD Hard Disk. Note: For Raspberry Pi 4 Model B 2.5 inch SATA HDD/SSD storage board, please refer to ASIN:B07VXF2HJG; For Raspberry Pi 4 Model B mSATA SSD storage board, please refer to ASIN: B07VXFGFLX. ✔ Supports…
Read more about this product
7 Review
Useful in creating your own DIY electronic projects. 2 hole strips with power bus lines for quick and easy prototyping. 15% larger than other other protoshields for extra components. High-quality and Gold-plated finish to prevent oxidation, and all holes are through-plated for mounting strength. Lead free and RoHS compliant, Environment-friendly
7 Review
Updated Manufacturing Process with Improved CNC Aluminium Alloy Quality. Cool Design and Nice Looking Raspberry Pi Case With Dual Fan. GPIO and all Main Connectors are easily access to use. Comes with MazerPi Dual Cooling Fan; No More Overheating Problem. Comes With High Quality Thermal Tape.
7 Review
Wide Application --- The new 12-layers cluster case is designed for Raspberry Pi clusters, Raspberry Pi NAS servers, Jetson Nano clusters, and disk array clusters to to provide shell protection and cooling solutions. It’s compatible with Raspberry Pi4B/3B+/3B/2B/B+, 2.5MM HDD, Jetson Nano (Note: Not for Raspberry Pi Zero). Simple Installation --- The…
Read more about this product
7 Review
OLED display shows more convenience. Can Lithium batterues powered. Use ESP32 Chip not module integration, smaller volume
7 Review
This PiTFT 3.5" is designed to fit nicely onto the Raspberry Pi 2 or Model A+ / B+, not compatible with original Model A and Model B. Comes fully assembled and ready to plug into your Pi! (See not below). You can also have an HDMI display separately connected.(This may be required during initial setup). Features a 3.5" display with 480x320 16-bit color…
Read more about this product