Switch works fine itself. Blue LED is nice and bright. Only 4 Stars as the terminals were bent when I got it. No big deal, but possibly suspect quality control?

The switch works exactly as it's suppose to. Besides the fact that when it is hooked up so that the light will turn on the light draws most of the power. And anything connected to the switch will not receive enough power. After noticing this I connected the wires to the switch differently so that the light will not turn on anymore. The switch still looks pretty cool though.

Very nice piece and well built. The LED is cool but only lights up when it's turned on. I used a few of these on my RZR XP for light bar and LED whip. At night I wish the light would be on to easily find my switches in the dark. I suppose I can figure a low voltage signal to sent to it when I turn on my headlights to lit up the switch but haven't messed with that yet.

I bought a second similar switch but with a red cover and planned on using both of them but. This one looked so cheap because the "carbon fiber" looked like a sticker I just threw it back in the box and didn't use it. Waste of my money.I wanted to give it 1 star but amazon wants you to give the seller a chance to fix the problem for a low rating,but for the small amount of money I lost I already felt I was hassled enough.

This is my favorite switch ever. I installed it on a custom vehicle built to look like a Jeep Willys. The little LED on the switch is cool. The cover is cool. It works just like I'd expect it to work and it makes my vehicle look more high tech than it really is.

This light is AWESOME on my pontoon boat. Turns off when switch is off, which is perfect! Also, when you close the cover the switch and light goes off. Had a problem leaving the main switch on my pontoon in the on position, and killing the battery. This will help because it's very bright when it's on. Plus it looks really cool, like a fighter cockpit.

Bought this to be used as a purposely over elegant switch for use in a electronic project I had recently built. While I'm only using it to control 9VDC, and a few hundred milliamps, it functions perfectly. After I made the final case and mounted this to the top, it gives it a nice bit of flare. The LED shines bright, and the rocker case operates very smoothly. Much nicer than cheap flimsy toggle switches!

Great switch. Feels like profession grade. Pretty cheap as well. Worth the money easy to install if you know how to but there are no directions.

These are great switches easy to use but the only thing to keep in mind when you mount them like on a panel the ground connection is right at top so you have to adjust height so it doesn't touch what you put them on other than that they are super

Great looking switch I used to wire up with my off road lights. Obviously its not real carbon fiber but a plastic replica. please tell me you didn't think it was real ha ha. Anyway very easy to install and seems durable enough. The Blue light is very blue and bright. Keep that in mind when deciding its placement.

I gave it four stars only because the led in the toggle is too bright. I use it for auxiliary lighting on my truck so that means at night, and this thing lights up the whole interior.and my face. But other than that it works great and is built well

Only installed for short time, but seemed sturdy & they work well so far. My old ones gave it up after about 5 years - hope these two are better.

i needed to add an auxilary power supply on my gator to power a 40 gallon sprayer. i went to a 12v accessory outlet from this switch and replaced the ends on my sprayers to match. now i can easily change tanks and other items without going back to the battery with clamps. and this switch makes sure it dont get turned on by mistake and the light makes sure i easily notice and remember to turn it off. perfect setup. great product so far.

I used http://www.amazon.com/gp/product/B000COA31K/ and http://www.amazon.com/gp/product/B00F9XQ65Q and http://www.amazon.com/gp/product/B0060U92FS plus some fuse blades to make an inline fused switch to control the radio fuse in my fuse box. My head unit for my car has a short that doesn't always power it down when the car is off, this is an issue because I need some of the functions in the head unit for accessibility. Making the inline fused switch to control when the fuse box gets a…

Yes, the wiring can be a bit confusing at first, but some simple experimentation quickly shows you what does what. The top lead is to the ground from the LED in the switch, the middle tab is from your power source, and the third lead is to the peripherals. I would assume you could power other things off of the LED ground tab since (I'm assuming) there's an appropriate resistor in line with that LED, so if you needed to have indicator LED's somewhere else showing this switch is on, that lead…

The switch works fine, but the LED failed after just a couple months - and that was with light use. I used this in a 12v system in my truck to occasionally charge a second battery in the back of the truck for use when camping. The switch is used so I only opt to charge the secondary battery when the truck is running. I control the charging at the dash, and that light is supposed to help remind me when the switch is on, so I don't draw on the main battery when the truck is not running. Also, it…

I liked the product very much. They price was good and the switch looked good. I have owned this product for about 8 months.

This switch is just awesome. It lights up red when on and the switch can be closed to prevent it from being broken or hit like the aircraft switches. I installed this into the bed of my 2011 F150 XLT to turn my bed lights on and off. Its diesel as hell and hasn't had one issue.Battle Tested: 5 Stars

I can't really even rate this product. It came in the mail unusable. I spent two days wiring my HHO Generator and I ordered a new switch because my dog would accidentally turn on my generator. This switch seemed like a good fit, it even had a red led light to let me know power was running through the machine. After installing everything I flipped the switch and nothing happened. After some investigation I realized no power was getting through the switch. I replaced it with the old switch just…

This switch works very well. I have it controlling my LED light bar and I like the fact that it's got the slap cap on it. It's easy to find and turn off when I need to turn the light bar off. The fit in my 99 Pathfinder could have been better but it is good enough and doesn't wiggle or bounce around. The build quality seems very solid.