Has pros: The price-quality ratio is normal. Relatively quiet for the money. Has some cons: Grinding irregularities are compensated by replacing thermal paste with MX-2.

I bought it for socket 775, it was indicated in the product description. In fact, it came without an adapter, I had to look for it and collect it myself.

I bought it for 800, instead of Cooler Master "Hyper 101. I installed it quickly and without problems, in 30 minutes, taking into account the dismantling of the old one and cleaning the "stone". I tested it on the game Call of Duty - Ghosts. The most "gluttonous" game I have on my computer. Before loading 32-37C, during the game 49-56C, TMPIN2 43-47C. "Hyper 101" gave out 42-45C before loading and 64-69C during the game, I even had to turn it off. But most importantly, it became really quieter.

Well made and inexpensive item Different pros: -removes heat very well in games (i7,920,1366 socket, without overclocking) -quiet - valve of normal quality and diameter -compact -not expensive (took in 2022 for 1700) - thermal paste is already applied and it is good for work -attached to the motherboard firmly, although on clips - Looks good, good quality product -Chrome-plated ribs are strong enough - four tubes with direct contact - ease of installation - versatile set of mounting options…

I bought this cooler for the FX-8320, the temperature of the cores in idle is 20-25 degrees, after an hourly stress test the cap is 60 degrees, and the core is 57, which I consider a very good result! I got into my not the largest Gigabyte case without any problems, but its most important advantage is silence! Now I hear only the noise of the video card cooler, even under load it is only audible if you stick your head into the system unit. Regarding the attachment for AM3, it’s somehow not…

Some pros: -Relatively quiet -Compact -Temperature maximum 86 gr. which I saw, in the normal mode around 36 gr. With its cons: -After 2 years of use at high speeds, it began to sound louder than usual, a little louder than the entire system (not critical)

This review will be useful to those who have a socket 1366. And, especially the Asus Z8NA-D6 mother. The mount is superimposed on DDR3 and polymer capacitors. There is an exit! We take the mount from 2022! We remove the threaded bolts by biting the washer, we grind it evenly so that these fasteners do not touch anything around, we tighten it with M3 bolts with a wide washer! The flight is normal. As for the fans themselves - everything is fine, there are no complaints. The airflow is even, the…

The plates are like razors, be careful, I reached for the mother’s food and accidentally ran my hand over the cooler radiator, as a result, a cut, and I wouldn’t say that I pressed hard. Decently copes with the fx 6300 95W which is overclocked from 3.5Ghz stock to 4.2Ghz, it's fine in games, but in OCCT it still reaches the reset temperatures during overclocking. in stock, the processor did not see more than 50 degrees to heat up in OCCT, the old CNPS7 with three tubes of 92mm cooler could not

It so happened that I have very large brushes, so there were hitches with its installation. But nothing, got up like a glove. Before him was a long-standing box bag 9-ka. After the replacement, the temperature dropped as much as 15-18 degrees, which is impressive. When choosing Coolers, there are now a lot of different rubbish, with backlight, with music with a bald devil, but there are few simple ones without everything. Here Gammahi will always help out!

Cools AMD Atlon X4 860K - 95 watts. Minimum temperatures - 28-30 degrees, rpm 928. The maximum in Aida is 47 degrees at a speed of 1214. I checked it with the fan turned off - the temperature rose to 81, with a frequency reset by the processor (at 80% load). As it was correctly written here - pulling the radiator up with a spring does not really hurt to remove part of the load from the board. I didn’t level the surface - more thermal paste and the problem is solved by itself. I applied it in…

The cooler is indeed very, very quiet; at maximum speeds, the cooler becomes audible, but in reality it doesn’t reach them - even at 100% load on the processor, the cooler copes with 1200 rpm, where it is still quiet. The cooler is very powerful; by the way, this is the only inexpensive cooler with 4 heat pipes that cover the entire processor cover. I have an AMD FX-8320 - that stove, 125W! the usual radiator IH-3075 did not cope at all, in idle it reached 60 degrees, and the noticeable noise…

Pretty quiet cooler. Lightweight, comes with 3 different mounting kits. but here under AMD there is the same old, reliable, but inconvenient hook.

Survived 3 upgrades, cooled i5 750 (4.1), xeon x 3450 (4.0) now ryzen 2600, all processors at maximum overclock. Ryzen (4.1GHz 1.41v + -120 watts) copes with the last of his strength (games up to 70, AIDA64 stress fpu up to 103), and then after tuning in the form of leveling the contact patch and replacing the fan with be quet 2022 rpm . I will change to something bigger like Deepcool redhat, Neptwin. be quet dark rock pro. well, or water)))

When installed on an overclocked i5-3570 Ivy Bridge up to 4GHz, this cooler cooled it without rolling over the thresholds at which the fan begins to rotate vigorously, causing noise. In games, the cooler is not audible. It becomes audible in stress tests such as OSST, when the temperature approaches 70. In idle, the temperature is 33-35, in games it is about 55-60. And then I think this is not the limit, it is possible to achieve even more positive results, if not for one BUT . So this is the…

The fan started making noise after a year. I will try to replace (with noctuyu) But perhaps this home repair had such an impact (there was a lot of dust, maybe something got on the bearings)

Got pros: quiet, cools not bad compared to boxed, dropped by 7 degrees, in idle 32-35% AMD 2200G in a stress test 71-73 Some cons: I don’t know why the description says that the am-4 socket is not mentioned on the box

I changed the boxed cooler from the 1500s to this one, although the percentage itself is cold, but the noise from the boxed one is already fed up. The thermal paste has already been applied, but what kind of paste - xs, trust it or not - is a purely personal matter, I am against this. Got pros: The price, not bad for him, could be lower, thanks to the bucks. Silence, you can barely hear how the 120 propeller is spinning. Got cons: Thermal paste, already applied, but why? I had to get dirty. The

Here is the configuration ASUS PRIME Z390-A Intel Core i5 9400F And this is what happened: for the 1151v2 socket, the mounts provide for plastic latches simply, but something went wrong: they were not enough in distance to completely snap them into place! I must say right away: yes - I checked the correctness of the choice of fastening (several legs are included for a number of sockets), yes - the arms are straight and yes - this is not the first assembled computer. Of course, I was able to…

In general, the cooler is quite worthy for its money. And yet, I don’t know whether to write this as a disadvantage, but I didn’t find thermal paste in the box. Of course, she was on the heel of the cooler, but still I would like to see her separately. Different pros: Pretty good power dissipation. Completely takes out the Ryzen 1600 in overclocking to 4Ghz under 1.38 V. (driven on OCCT and Cinebench) Has cons: A little noisy, I would say, but for me personally it is not critical. But the…