Header banner
Revain logoHome Page
cpu cooler enermax ets-t50 ax silent edition logo

CPU Cooler Enermax ETS-T50 AX Silent Edition Review

17

·

Very good

Revainrating 4.5 out of 5  
Rating 
4.3
Computers, 💻 Computer Components, 🧰 Computer Internal Components, 💻 Computer Components

View on AmazonView on ЯM

Media

(12)
img 1 attached to CPU Cooler Enermax ETS-T50 AX Silent Edition
img 2 attached to CPU Cooler Enermax ETS-T50 AX Silent Edition
img 3 attached to CPU Cooler Enermax ETS-T50 AX Silent Edition
img 4 attached to CPU Cooler Enermax ETS-T50 AX Silent Edition

Photos by authors

(7)
img 13 attached to CPU Cooler Enermax ETS-T50 AX Silent Edition
img 14 attached to CPU Cooler Enermax ETS-T50 AX Silent Edition
img 15 attached to CPU Cooler Enermax ETS-T50 AX Silent Edition
img 16 attached to CPU Cooler Enermax ETS-T50 AX Silent Edition

Description of CPU Cooler Enermax ETS-T50 AX Silent Edition

BETS-T50 EXE Silent Edition is a powerful CPU cooler with 14cm high pressure fan with patented Twister LaserTM technology. The low top speed of 1000 rpm ensures quiet operation even at full load. Five 6mm heatpipes combined with innovative airflow optimization technologies deliver cooling performance up to 230W TDP. For rapid heat transfer, heat pipe direct touch technology is used, in which copper heat pipes come into direct contact with the processor. The asymmetric heatsink design leaves room for modules with more RAM. The self-retaining mounting system provides secure, high contact pressure...

Reviews

Global ratings 17
  • 5
    12
  • 4
    2
  • 3
    1
  • 2
    0
  • 1
    2

Type of review

Revainrating 5 out of 5

I'm very happy with the product, it's very satisfying.

Let's see how it behaves in terms of TDP, in terms of size there are doubts that the data is true, but we'll see if the material and design of the tubes make it difficult In the case from NZXT with a monochrome motherboard, it looks bombic, for me the appearance is also important

Pros
  • Stylish, glass case looks cool Quiet at standard speeds Good equipment Does not block RAM slots at all, you can not be afraid to take dice with high radiators
Cons
  • I haven’t found it yet, I just assembled the computer, there are suspicions that the fan is noisy at higher speeds. when you start the PC, it spins to the maximum for a few seconds and you can hear it, in normal mode it is very quiet, I compare it with an expensive system from Noctua (the system manager took it from the office to a remote location)

Revainrating 5 out of 5

Reliable purchase, guaranteed to be a good purchase.

Copes with the task, for amd must have! Due to the fact that the plane of contact is absolutely flat - the efficiency is excellent. Cools R5 3600 at 4200mhz

Pros
  • Appearance, thermal conductivity, straight outsole.
Cons
  • In some rotation ranges there is noise (hum) of the fan itself. In the BIOS, everything can be corrected by adjusting the rotation of the fans.

While it is difficult to say that there is some kind of service, let's see how the issue is resolved later. Then, if necessary, I will add. Pros: It is extremely difficult to find any merit in what cannot be established. Its cons: Incorrect packaging, the lower cooler clamp is missing. The store pushes the responsibility on the manufacturer.

In my opinion, a super cooler for your money. And if there is no difference, then why overpay for super brands and names. Highly recommend.

Pros
  • Cool cooler. At the level of be quiet! and Noctua, but Enermax is cheaper and doesn't cover memory slots. The valve is not audible at all even at maximum speed. Even a child can handle the installation. The kit comes with a paste, by the way, very decent.
Cons
  • The only drawback is the lack of second mounting brackets in the kit, but for me this is not a particular minus.

Revainrating 5 out of 5

A really necessary purchase, glad I found this product.

Quietly and without panic cools 5 3600. Relatives thermal paste is replaced by a thermo bear. The airflow guide is removed, like minus a couple of degrees because of it.

Pros
  • Kit, silence, the ability to put a second cooler. Appearance.
Cons
  • Thermal paste, if you don’t show off, then it’s normal, but I replaced it with a thermal bear.

Revainrating 5 out of 5

I didn't expect the quality to be so high.

Great tower for its 3500! Strict black design, excellent performance. Ryzen 5600x cools perfectly (temperatures at the peak do not rise above 73 degrees) Quiet. When assembling, the only nuance is troubles with the length of the screwdriver, but with proper dexterity, you can handle the usual one, but you have to twist it at an angle - carefully monitor the tightness of the fit to the process.

Pros
  • Design, quiet operation
Cons
  • Need a long screwdriver for installation - keep this in mind

Revainrating 5 out of 5

The quality is at the level, I am satisfied with everything.

Big, heavy. The coloring is of high quality, it will not peel off from the slightest touch of staples and a screwdriver. Looks solid. The fan is 140 mm, it works from 530 to 1100 rpm, it cannot be completely turned off using PWM, it resists. It’s hard to tell by pressure or air flow, but if you feel it with your palm, the result is not impressive. If desired, you can finish with a more powerful propeller. Ryzen 5 2600x at 3900 MHz, in the stress test from AIDA64 (~125W thermal pack) holds at…

Pros
  • Well made, nice to hold in your hands. Quite easy to set up and install. Pretty quiet fan. Processing mating surface is good, not perfect for grinding, but even. Shifted to the back wall, does not overlap the memory strips, at all.
Cons
  • I would like to get additional brackets for installing a fan. And those that are - are designed for holes like a 120mm fan. Ordinary, at 140mm, you just can’t stick it in. But these are just quibbles. Since it is large, it covers the very first PCI slot. 😒 there was an idea to tuck in the bracket for vertical installation of the video card. Did not work out.

Revainrating 3 out of 5

The item is average, not sure if it's worth the money.

A normal cooler for its money will cool r5 3600, 5600 in overclocking, r7 2700, 3700, 5700 with overclocking of 400 +/- MHz will also pull, but no more than the manufacturer claims 230 watts of heat dissipation, in fact these are exorbitant figures for this cooler Has some pros: design, good backplate and affordable price at the time of purchase paid 3k Some cons: a large percentage of defects with turntables, I was not lucky and after 2 weeks he began to buzz like a damn, regardless of the…

Revainrating 5 out of 5

Excellent quality, absolutely not expected for such a price.

I bought it after listening to good reviews online. didn't lie. the only thing worth noting is that for a comfortable installation you need to have a long screwdriver. without it, you will have to struggle with the usual one, especially if you install it right away in the case. because of this, I'm not sure that I ideally pressed it to the CPU. because my temperature is 3 degrees higher than in the reviews. but it's still below critical. in shaitan mode, the asus motherboard does not raise…

Pros
  • appearance does not interfere with memory
Cons
  • not trivial to install

Revainrating 5 out of 5

The best price for such a product, I will buy more!

Item received and installed. While the PC is at the assembly stage, I am waiting for the arrival of the RAM and I need to buy a hard one. Therefore, I can only rate the product partially. There were no problems with the installation. Partly with the help of the instructions, partly intuitively installed the backplate and mounts. I applied the paste, pressed the cooler without any problems and spun it. True, it should be noted that I have a screwdriver from Noctua. It just fits the length…

Pros
  • Quiet, smooth, sympathetic. Easy installation.
Cons
  • A screwdriver is included in the kit.

Revainrating 4 out of 5

Good value for money, I recommend.

At first I wrote that it was making noise, but it turned out that it was the blowing cooler making noise. I corrected the situation, played Cyberpunk and I can say that the cooler is excellent, it is almost inaudible. The computer is on the floor half a meter away from me. The top section on the case has a blown cooler, so I would hear noise. But no, the i7 7700k heats up to 50 degrees and the cooler doesn't make any noise at all. The stock under the same circumstances was very noisy and the…

Pros
  • Beautiful. Looks very solid. Didn't take up much room in the case.
Cons
  • Poor kit. The syringe with thermal paste is small, and not as huge as in the reviews. Enough for installation, but no more)

Revainrating 5 out of 5

The quality exceeds all expectations, I recommend to buy.

I use a xeon 2660 v4 processor, room temperature is 20-25 degrees, I forgot about throttling, the processor never drops the frequency, in dynamic scenes only the video card is loaded and slightly noisy (2060 is super). the cooler and radiator solved the problem of overheating forever, the RAM plate with the radiator may not fit in, a large case or a case with a bulge on the side for the cooler is also pressed.

Pros
  • there is no noise at all, the processor is cold
Cons
  • No

Revainrating 5 out of 5

The quality is at the level, I am satisfied with everything.

I put it on Ryzen 7 2700, it cools wonderfully. Prots planned to overclock, but then changed his mind, and in the drain the temperatures are approximately the following: Simple: 36-38°C Low load: 39-42°C Average load: 45-52°C High load: 55-61°C Pros below: Pretty quiet, completely black, does not stand out from other components. Rotator 140mm. Thermal paste included. Cools well. Installing is easy enough. Some cons: It almost always works at maximum speed, while if you listen in complete…