CPU Cooler Thermalright Macho Rev.B Review

Regarding the installation - it's better to watch the video right away, the instruction is uninformative. Thanks to a large heatsink, it can cool modern processors (without overclocking) in a passive mode - without a fan. Comes with a great magnetic head screwdriver.

This is a greatcomoler, have been using it for two years now,comoled my R5 2600X - 3600 - 5600X Incredibly quiet and efficient. Thecomntact surface is mirror, thecomntact is uniform. Very easy to install,comes with a long screwdriver. Yesterday I put it on Ryzen 5 5600X, AIDA64 did not rise above 63 degrees in the stress test. Cyberpunk 2077 keeps the CPU at 61 degrees! Greatcomoler, but unfortunately not cheap. Test video ? v=fJcuIpgyWUo&t=343s ? v=3nORRx4MSt8&t=325s

I5 9600k in boost without overclocking in Hades 64 keeps 58 degrees, while the cooler is not audible at all. I will drive the stone up to 5 GHz with a feeling of complete calm. I definitely recommend it, I'm sure that 9700k will easily pull in overclocking!

When unpacking, I didn’t notice that there is a tiny pattern on the contact area with the processor, microarcs are all over the area, I bent them around the edges With its pros: Norm cooler, healthy, quiet, cools well The fan is attached to the radiator with springs, there are springs for 2 fans in the kit, if necessary With its cons: Healthy, checked whether it would touch the elements of the mother, but everything is ok

After a few years of use, the fan died, now I'm looking for and I can't find one. The fan itself is 140, and the fan housing mounts are like 120 .

Maybe I’m crooked, and yet I had an Antec c40 where the fan is attached to the radiator through 4 rubber bands, so you can’t break or bend them, but I managed to break 3 pieces, as a result I had to on clamps

In the case (zalman i3 not edge) 6 turntables, cools i7 8700 not K. In 5 battles the temperature is max. 60 degrees. In the stress test of Aida with all the checkboxes, max. Core temperature is 70 degrees. In games, spin at 400-600 rpm and it is not audible at all in a closed case.

Before installation, I recommend that you carefully read the manual, and watch this guide: ? v=8SP8EWwAziE Got pros: - He's really quiet. The only way to make it even quieter is to remove the turntable, thereby turning it into a passive one. The only question is why? - Out of competition in terms of watts. / dB. / $ - A chic screwdriver as a gift. Yes, for 3,000 you also get a free screwdriver. Why not a holiday? Has some cons: - Dimensions. It is installed exclusively in wide cases. The cooler

I would like to warn those who are going to buy a cooler. They sent it to me, they took almost one and a half thousand for delivery (as a result, it turned out about 5K for the tower). I happily accepted it in the department, I come home, I open the box . and what do I see? - That's right, I see a peeled film on the sole of the tower and I don’t see a sticker. Very unpleasant. ps Do not be afraid of a hump on the sole, it's bull they say that on a macho it is terribly large and the temperature

Leaves mostly positive thoughts after operation. I can recommend for purchase, since the price is quite low compared to similar towers. Some pros: - Nice appearance - I got into the NZXT H400i case without any problems, I did not even remove the motherboard for installation. The glass on the case closes, there are still a couple of millimeters left. - On the MSI B350M Mortar Arctic motherboard does not overlap either PCI-E slots or DDR slots, does not rest against any MP elements. You can climb

I advise those who want experiments with overclocking and plus silence and who have a fairly large case. Different pros: Previously, there was a Zalman CNPS 5X Performa. When idle, it was 45 degrees on the processor, and when LinX-0.6.5 warmed up, it was up to 65-70. The fan howled like an airplane turbine. Replaced with Thermalright Macho Rev. B. Now, not only does it cool perfectly, but also almost complete silence, you can only hear the work of the winchster. With a simple percentage…

Stands on Ryzen 9 3900XT overclocked to 4.5. Above 55 did not see the temperature even in games, but the fan is in manual mode. And he is only one. Comes with brackets to add another one. The complete cooler at the maximum gives out somewhere around 1200 rpm, it is not audible at all. In idle, it spins around 500-600, while the temperature is 44-48 degrees. Again, the manual mode of the fan also corrected the voltage of the processor - 1.3v goes there. I cannot vouch for the purity of the…

The Ryzen 5 1600x in stock after 10 minutes of prime95 running has a stable temperature of 67 degrees. For comparison: True Spirit 140 Power on Ryzen 7 1700 @ 3.7 without increasing the voltage gives 63 degrees. In both cases, Arctic Alumina paste was used, so I can’t evaluate the “native” paste. On the prime b350-plus mother, it does not interfere with the installation of a video card in the top slot. Memory with a high heatsink in the first slot will probably run into the cooler.

Cooling is great! Cools 8600k at 5 GHz temperatures in tests no higher than 82 ° in a closed case + gtx1080 (65 °) in games more than 75 ° did not see mx4 thermal paste Later I scalped the percent and smeared it with liquid metal, as a result -20 ° In tests, 62 ° in games, 57 °, given that this is tower cooling, the indicators are super Pros: Great cooling at 240W Very quiet, the 140mm turntable is absolutely inaudible, for 2 years Fully nickel plated Flat plane milled Includes a cool…

The quality of cooling is beyond praise. The i5-6600k processor, being overclocked to 4400 MHz, is cooled by only this one radiator (case ones are simply turned off as unnecessary) at rest up to 30 degrees at room temperature 25. In the mode of operation of all 4 cores to the maximum and loading the video card, the temperature rarely rises above 50 degrees. 60 is the highest I've seen. The noise level is very low, in a closed case you can hear the screws spinning more (for such a quiet system…

Took for 3.6k for 9600k. Without overclocking, it copes with a bang with the heat dissipation of the stone. The upper part is painted black, which will fit perfectly into the black assembly. The screwdriver in the kit pleased me, it is there to the place! The fan is not audible at all, even under load. The kit includes 2 additional brackets for mounting additional. fan + vibration pads. I chose between water and air, decided not to take risks and took a macho. In general, I am satisfied with…

My ryzen 5 3600 in stress test is 99% above max 68 degrees I put a screw from Noctua on the radiator, just a buzz, guys, I advise everyone

It seems that the first slot of the RAM does not block the cooler valve, but in my slot the RAM fit in, but did not snap into place (8 GB Patriot Viper 3400 Mhz PV416G340C6K), although the radiator seems to be small, as a result I put the RAM in slots 2 and 4, although I thought over time to fill all the slots, now I'm thinking // In the aida64 hourly stress test, the stock 9600kf temperature was up to 63 degrees, which is buzzing.

Very high quality cooler with a good package. Screwdriver charm =) Was taken for a makeshift home server to reduce noise. And so, under linx 0.6.5, the temperature rarely crawled over 70 degrees to 4790, with forced 4 GHz on all cores at a voltage of 1.060 volts. At the same time, the cooler in automatic mode, on the default settings of the cooler in the BIOS, did not spin up more than 750 rpm, and was silent. Somehow you can only hear it at close range.

Very big. Check the possibility of installation in your case in height. Due to the size, it can cover the 1st RAM slot on some motherboards. Max. the temperature that I saw at I 7 6700k (without overclocking 76 degrees!