🖨️ High-Quality ERYONE Printer Filament 1.75 mm - Accurate Tolerance Review

This Eryone PLA+ was easy to print. The resulting printed models were smooth, with even layers with no visible stretch. The color was a nice light green with a slight sheen. The line wound very evenly on the spool. I had no problems printing. I printed at 215 degrees with a table temperature of 60 degrees. I printed at 100mm. Overall I've had fun printing with this Eryone filament and I look forward to trying other colors especially the marbled one which looks cool.

I am new to 3D printing but have an Eryone ER20 and also use Eryone filament. I measure the thread and calibrate with each spool. I use Cura 4.8 for my slicer and meshmixes for restoring or editing. Most of my PLA+ prints are 215-220/60-68 with .15-.20. I have no problem with the filament not sticking to the glass substrate. I adjust the temperature of the bed based on the room temperature and whether the window is ajar or not. I haven't had any issues with any of the Eryone PLA+ filaments I've

Printer = Eryone Thinker SE Direct Drive, Bigtreetech SKR 1.4 TURBO TMC2209Slicer = Cura 4.8 driver with Artillery Sidewinder X1 profile. Print Speed = 75mm/cTemp. 20% gyroidSupport = only touches the build plate. Very nicely packaged thread. Printing my custom designed front panel started with some apprehension as I started hearing pops and small gaps on the first layer but this disappeared after the first layer, after completing the 2.5 hour print the end result was excellent as on can be…