FEL PRO VS 50365 Valve Gasket Review

Exactly this Felpro number Used 6 times in the past and they fit. These new ones are too long at .250. Bought 2 of these and both were 1/4" longer. I had to purchase an OEM gasket.

I was refunded as it was not suitable for dual cam foreplay and after return I was charged again as it was not was come back even if UPS scans the returned items

Spark plug sockets and gaskets fit perfectly! As some others have mentioned, the valve cover gasket is oversized by about 1/2 inch. I had a hell of a time to put the pad in so it wouldn't fall out. I used some clear RTV silicone and left the valve cover on the gasket on a flat surface to cure. This seemed to work very well.

The rubber seals for the spark plug tubes fit perfectly, but the main seal was too big. It went into the groove to the very last corner which seemed about 1/2 inch oversized. At one point I thought it was there, put the valve cover on but found it popped out. once again. I went to a Honda dealer and bought the original gasket, problem solved. I think the quality of this pad was good but in this particular case it didn't fit well.

I bought this valve cover kit for my 1995 Honda Accord with a 2.2 engine. All parts in the kit are OK except for the most important thing, the valve cover gasket. The gasket is a little off specification and the biggest problem is that it doesn't fit very tightly into the groove in the valve cover. (Yes, I know how to put on a pad without stretching, I've done it many times in the past with no problems). As a result, the gasket will not stay in the groove when you turn the valve cover over to…