🖨️ Revolutionizing 3D Printing with MIKA3D's Silver Copper Filament Printer Review

So originally I was going to give this one 1 star because my extruder keeps jamming with just this filament. However, after extensive testing, I have chosen the settings so far that I no longer have any printing problems. I am using an original Prusa i3 Mk3 with a 0.4mm nozzle and should use the following settings to keep this filament from getting stuck mid-print: : Min 30% Max 60% (disabled for first layer) Z- Hop: Disabled Retraction Length: 0.5mm Retraction Speed: 40mm/s. I also set the…

While this filament gives good results, it can be difficult to achieve such a glossy finish on the entire print. If you just use it like any other PLA filament, you'll find that the edges of your print have a nice shiny metallic look, but the base and top coats can be dull (and frankly, ugly). These colors look terrible without the filament ). seem to be). Unfortunately, there doesn't seem to be a way to polish or restore that shine. I've tried sanding, heat, steam, polyurethane, etc. After…

I bought both the different packs of 'High Gloss' and 'Silky Metallic Gold' so this review reflects my experience with both Mika3D PLA types reflected. filament.UPDATE: I continued to struggle with under-extrusion/filament jamming, especially when printing finer detail with the 0.25mm nozzle. Luckily I just found a setting in PrusaSlicer that seems to have solved this problem by limiting the maximum flow/pressure. By setting the "Maximum Volumetric Speed" I can prevent the extruder from trying…