🔒 Pack of 10 XtremeAmazing Fuel Injection Hose Clamps, 1/2"-9/16" Dia - Perfect Replacement Option Review

I asked for 5/16 fuel injector clamps at my local Napa and what I got is cheaply made and slightly oversized so they aren't quite tight enough even when dropped are . These clamps are much better in both respects.

I use these ear clamps when changing the fuel filter on injector snowmobiles. They are reusable, unlike factory clip-on ear clips. They're also a much better option than the old serrated auger clamps that dig into the surface of the hose.

I used these clamps to secure new 5/16 fuel lines to my Triumph motorcycle. The original fuel lines were attached with pinch clamps. I didn't want to use mini radiator hose clamps so I looked for something more permanent. They work great. There are no leaks and I am more confident that they will withstand the pressure of the fuel in the lines. Glad they are!

I think most transmission owners are familiar with standard worm gear clamps: their inevitable hose cutting, frequent failure if overtightened, and tendency to rust when exposed to the elements are. As you can see from the picture, the AAS injector clamp has a solid band that eliminates cuts from the slotted worm gear band. Not clearly visible in the picture is the band of the fuel injector clamps that protrude from the hose, which prevents the sharp corner of the band from digging into and…

I bought these to use on my diesel pickup truck fuel lines. My truck uses a high pressure lift pump, 65-75psi in front of the injection pump. "Normal" screw tensioners are not strong enough for this pressure. Fuel injection clamps are required. They work really great, I'm just picky. You really have to crank these things really hard to get full tension. I found that because the clamps applied so much pressure I had to go back a day or two later and retighten them as the fuel injector line (high