🛠️ YITAMOTOR Towing Mirrors for 99-07 Ford F250/F350/F450/F550 Super Duty, 01-05 Excursion Pair Set Extendable Smoke Power Heated with Signal Light Side Mirrors - Enhanced SEO Review

Easy installation. All you need is a standard screwdriver, 7mm, 7/32 and 11mm 1/4" deep sockets. Put your power tools aside for this. The 4 screws holding the mirror require no more than 9 ft-lbs of torque Remove the black plastic from the top of the door panel Remove and slide out the power window glass at the front of the door panel Remove all wiring connections to the window/door lock Remove the red lamp cover using a standard screwdriver in the notch. Remove the 2 small screws holding the…

Very impressed with these replacement mirrors. Large mirrors provide impressive visibility, especially when towing and reversing. They were packaged very well and with extremely thick weatherproof foam. As mentioned, the foam backing makes installation difficult. I used a quick clamp like someone recommended to hold the mirror in place and squeeze the styrofoam to tighten the two nuts, then tighten each a little to install the other two and tighten in a star . The cable adapters worked great. I

These mirrors are much better than the junk wing mirror that came with my 2002 F350 SD/CrewCab/XL/SRW. It's almost a crime that this truck didn't come standard with mirrors like towing. These are clearly fakes, but they are of enough quality that I don't mind paying 1/4 of what a similar set would cost at the dealer. Flat mirrors are great, but the real benefit is the lower convex mirror, which lets you see what's directly behind and beside you without having to turn your head to make sure you…

good solid product came very nicely packaged. Thought it would be quicker to install not knowing I had to remove the door panel. It was very simple, two bolts and three wire connectors, and you had access to the bolts for the mirror. I have an F250 2000. Great fit. Those who say here that this is not suitable should not work with cars. It took a bit of fiddling to get to the right spot. The screw holes (like the factory ones) are slightly larger to allow room to adjust the mirrors to better fit

It has been over a year and miles since I installed it. I am very happy with my 99 engine and my wife's 99 engine which we use to tow our 6 seater trailer. They increased visibility when towing, which was a big problem with factory jelly bean mirrors. I have recommended them to friends and people who are just curious. Great updated look, absolutely improved functionality and durability. I hit them on the walls and many trees and they helped me up. I would also like to note that the glass is…

Needed to replace a broken mirror on my 02 F250 and I found this. The installation is quite complicated, but take your time. Check everything for compliance and note that some registration is required. I watched a lot of youtube videos and adjusted the door mounting points with a dremel tool. The electrical connections for the fitting were plug and play. It took me months to return to light and warmth. Loves mirrors all the time. Much better than even the factory rearview mirrors! Now for the…

I received the mirrors well packed and boxed. They are VERY difficult for one person to put on, but I managed. I don't know what the connector on the end of the mirror is, but it required connecting two wires to it and then the round end to the other end. . This doesn't look like my switch at all, so I'm a bit at a loss right now. The description says "with adapter for Ford F250 F350 F450 99-03 Trucks." . . No, that is not so. However, I didn't have time to figure out how it should have been. I