3DXMAX ASA Dark Grey 2 85mm: Durable 3D Printing Filament for Stunning Creations Review

This is excellent quality filament and the print results are among the best I have seen from a filament in terms of producing functional details. I bought ASA for its chemical and UV resistance and matte finish. Although it is certainly not easy to print this material. To print hot, the build plate temperature must be at least 100°C to avoid delamination. The case is also essential if you are printing anything larger than 5cm. Finally, I would recommend investing in a suitable bed surface if…

There were some complaints in my first review, but after the optimization I liked the results. clogged immediately, so I've had better results with fans on, but after fixing the issue, it's working closer to default. My old review was about slower print speeds and adding fan cooling to the print quality part, true, but that's not how this stuff works when used properly. Please use my information below instead. After fixing my build issues, print temperatures of 250°C and 255°C on the first…

The best filament I've ever used. Point. (This review will be everywhere but hopefully it helps) I have a closed Ender 3 with a Micro Swiss hotend. Nozzle 250°C, fan with no parts, bed 100-110°C (hotter for large parts). The temperature in the housing is maintained at 40-45°C. I use a regular textured finish or regular glass + hairspray. Without further temperature adjustments, prints at layer heights of 0.1-0.2mm are equally successful at 60mm/s or less. Higher speeds are possible, but I did…