Box of 100 📦 Plaster Washers - 1 Inch Size Review

Excellent product. It takes some getting used to. I tried drilling with a shovel, it was terrible, the plaster is too dry. A few more things I learned: We have a drill press with three settings: one for drilling pilot holes, one for drywall screws, and one for button head screws. If I were using drywall adjustments it would be easy to tell when I was pressing the lathe, but it wasn't always level for a quick flush repair. I ended up using the pilot setting most of the time. It worked very well.

You did a great job. Very fast delivery. The ceiling in our Florida home has a thin layer of stucco/stucco applied over the original Tectum panels. A 12" x 30" patch of stucco had detached from the top of the tectum due to water leaks. It was torn in several places and bent about 1/8 inch. The painter didn't think it would be a problem but I didn't want to pay to have the ceiling painted and then part of it fell off. Using seven of these washers and drywall screws I was able to attach the…

I had a radiant heat plastered ceiling that had a crack at least 8 feet long and sagging on one side at least 2 inches below the other side. I placed temporary "props" between the floor and ceiling to keep the crack from propagating while I thought about the solution. The experts told me that "…the entire ceiling needs to be lowered and the new one raised. At least $4,000 to $5,000." Ouch. Then, after some searching, I found these 'ceiling knobs' and decided to give it a try. After tracing the…