Header banner
Revain logoHome Page
🔧 robust and reliable: polymaker tough filament 1.75mm black logo

🔧 Robust and Reliable: Polymaker Tough Filament 1.75mm Black Review

3

·

Average

Revainrating 3 out of 5  
Rating 
3.0
🖨️ 3D Printing Supplies, 🏭 Additive Manufacturing Products

View on AmazonView on ЯM

Media

(4)
img 1 attached to 🔧 Robust and Reliable: Polymaker Tough Filament 1.75mm Black
img 2 attached to 🔧 Robust and Reliable: Polymaker Tough Filament 1.75mm Black
img 3 attached to 🔧 Robust and Reliable: Polymaker Tough Filament 1.75mm Black
img 4 attached to 🔧 Robust and Reliable: Polymaker Tough Filament 1.75mm Black

Description of 🔧 Robust and Reliable: Polymaker Tough Filament 1.75mm Black

😀 【Almost Unbreakable!】 - PolyMax PLA is an engineered PLA with enhanced toughness, ductility and durability. This 3D filament 1.75 is the perfect material for applications demanding high impact resistance. The mechanical properties can be compared to ABS. PolyMax PLA combines excellent mechanical properties with great printability. Selected color: Black PLA filament 1.75mm ( PLA Black Filament ). 🧵 【Tangle Free & Moisture Free】 - PolyMax PLA is carefully winded to avoid any tangling issues, dried and vacuum sealed in a resealable ziplock bag with desiccant. Please make sure to NEVER let go the tip of the filament as it may create nodes. Holes on the side of the spool can be used to prevent this issue. 🛠️ 【Excellent Toughness & Layer Adhesion 】 - No warping, no jamming, no blobs or layer delamination issues. PolyMax PLA is a worry-free 3D Printer Filament Black which has great bed adhesion, very consistent color and dimensional accuracy. It is one of the toughest compare to all competitive filaments such as PLA+ filament. 🎁 【Best Gift for your 3D Printer】 - PolyMax PLA is a high quality 1.75 mm filament PLA and your 3D Printer will love it. Polymaker Black PLA 1.75mm filament is the ideal gift for you and your 3D Printer. ⚙ 【Printing Settings】 - Nozzle: 215 ̊C; Bed: 50 ̊C; Speed: 60mm/s (Settings can be adjusted depending on the color and type of filament you have selected). ⚠️ 【Important Note】 - Please make sure to double check the diameter of your order as it may automatically change when selecting a color. Selected diameter: PolyMax PLA filament 1.75mm Black ( PLA filament Black ). 🛡️ 【Risk Free & Lifetime Technical Support】 - We offer a full refund if the product is not performing as expected. This PLA is designed for your toughest 3D Printer Prints. Let us help you get your perfect beatiful prints and contact us via Amazon anytime you need.

Reviews

Global ratings 3
  • 5
    0
  • 4
    2
  • 3
    0
  • 2
    0
  • 1
    1

Type of review

Revainrating 4 out of 5

lays down like butter

This gray Polymax PLA is one of the best PLAs I've used. I've tried Hatchbox, Sunlu, Tech Bear, Geetech and a few others and this definitely fits. I use and end 3 v2 at 207 degrees with a 55 degree bed. Retract set to 5mm at 45mm/s and 27mm/s with 0.2mm nozzle. The detail of my D&D miniatures is amazing. I love the quality of the resin. After you adjust your settings, it has a slight stretch, leaves minimal layer lines, and is slightly more flexible than PETG and feels more durable than ABS…

Pros
  • Risk Free Lifetime Tech Support
Cons
  • New competition is here

Revainrating 1 out of 5

2 rolls good, 2 rolls bad

**Updated September 2021** Terrible and unreliable. The two replacement spools were just as bad as the two I returned. One managed to jam my printer so badly that it is now out of alignment (I got stuck on a bell while printing and 10 minutes was enough to damage my printer). I have no idea what's going on at Polymaker, but buyers beware. This filament is low quality and can damage the printer.**Previous Review**The first two rolls of black PLA were fantastic. Good adhesion, no buckling, clean…

Pros
  • Hardly broken!
Cons
  • Other Other

Revainrating 4 out of 5

Glass smooth layer lines not possible, but some warping

Flows smooth like water glass; sticks well to itself and adheres well to the bed. With a low layer height, e.g. B. 0.1 or less, you can get perfectly smooth prints with almost no visible layers. Very impressed with that. Suppose this is due to incredible quality control of width and material properties. I've also read that you can smooth out this material with acetone, but haven't tried it yet. There's still a big problem with buckling up and getting out of bed. (See photo) Given the level of…

Pros
  • Excellent layer strength and adhesion
Cons
  • boring packaging