🔌 Wireless Air Bed Pump Replacement - REM Air System for Select Comfort or Sleep Number Mattresses - 1 Remote, Controls Both Sides Review

Installed yesterday - the biggest hassle was opening up the mattress and removing the old unit to prevent a leak (which isn't really a problem , I just don't want to miss this!) Here are my first observations 1) Whisper quiet compared to the original pump (VERY old) no idea if they have changed over the years 2) Wireless remote control (hated wired)) 3) Smaller, flatter Profile compared to the old one, not a bulky block to try and find a place for it 4) Pumps the bubbles quickly 5) I haven't…

is a good replacement - the existing one from Sleep Number was over 10 years old when it stopped working. Two holes are used instead of the existing four (you only need to seal the hole that is not used on either side of the bed). Quality control needs work as I have a lost part inside - you can hear it rolling in the unit. I opened it and took out the broken piece of plastic. Also, nobody seems to have mentioned that it doesn't work as a remote for the sleep number - you don't set the number…

We bought this replacement pump about 10 months ago. Installation instructions are pretty limited, almost nil, but customer service was pretty quick. The pump worked well enough, but the remote control feature is quite annoying as you have to stop it at the setting you want by pressing the opposite button (as opposed to automatically stopping at your chosen setting). It's also a bit annoying that it doesn't use the same scale as others have commented, so you can't just go with a Select…

Great pump and easy install if you're not trying to disassemble the old unit. I spent a lot of time taking apart an old Select Comfort pump and ended up cutting off the tubing anyway. The cordless replacement air bed pump comes with its own fittings. Simply unscrew the fitting from the side of the tube and slide the compressor ring onto the tube. Install the new fitting and then thread the compressor ring onto the fitting to secure the hose. Then pull back the connector sleeve and snap the new…

Four stars for my first experience. I don't know how long that will take. I ordered this because my Select Number long life bed fan broke down last week. Installation was easy and straightforward. No instructions were given so I did what was logical. The air hoses connect directly to the blower, so I didn't use the connectors that came with it. I used the connectors that came with the bed to connect to the airboxes. This fan is much quieter but smaller in volume. No problem as you don't need…

We had a Therapedic (not Tempurpedic) six port Air Touch mattress. The pump died and the mattress began to deflate rapidly. Therapedic no longer makes air mattresses and an email to them went unanswered. We found that no one makes replacement pumps with six ports. Not wanting to spend thousands on a Sleep Number bed, we looked for an alternative. We found this REM replacement air mattress and pump. We emailed the company with a pre-purchase question and they responded within fifteen minutes on…

This product is incredibly easy to install and use! We bought this pump to replace a pump that stopped working on one side for our 12 year old Select Comfort bed. For the beginning. The only real assembly work you need to do is remove the two bolts from the stock SC pump, remove the cap, and then disconnect the air hoses. DO NOT disconnect the hoses from the bed itself. The new pump comes with a very easy to use screw for the quick disconnects on the end of the air chamber hose. While you'd…

Easy to install, quiet compared to my 20 year old Nautilus OEM pump although some adjustments are needed ($14.00 plus two AAA batteries - whatever you think for $229) CAN be included? !): First, the Nautilus pump was installed in a foam roller in a cavity that would not accommodate this replacement. I used a box of Revain to fill the cavity (god knows I have more than enough!) and added two pieces of tubing, 24" x 3/8" ID x 9/16" OD, to the unit reachable on the ground under the head of my…

I replaced my Sleep Number pump with these. I like the wireless remote versus the wired Sleep Number remote. I also hope it lasts longer. Installation was easier than expected, but that's because of the excellent customer service. The technician called me as soon as I emailed with a question. He also gave me a number for further questions. He was very helpful. The pump is much smaller and much quieter than the one I replaced. Installation was a bit tricky but the technician guided me through…