🚪 Sleek Hillman Hardware Essentials 852724 Satin Nickel Door Knocker - 7-Inch Elegance Review

We are getting our house ready to eventually put it up for sale so I painted our front door and removed a very old engraved door knocker that was there. Like one of the previous commenters, the old door knocker was one of those Moments Remembered pieces from Spain that are no longer in production, so I bought this door knocker after a previous very detailed review (thanks for your time!) as you can find another one at the hardware store returns. The holes in my door were already there and those

. This is important as the simple minimum instructions call for 3/16" holes and 1/2" holes. Installation Instructions >>> Check the back of the hammer and note the distance between the holes. Three marks on the ruler are enough, e.g. B. 3 inch, 5 13/32 inch and 7 1/4 inch. Medium - 5 3/8 inches plus some more. Use a spirit level to mark a straight line down the center of the front of the door where the hammer will sit. Mark three holes. Press in the three marks with a hole punch to…

I have replaced an existing door knocker and in most cases have been disappointed by the lack of detailed information on these products. In other cases there was conflicting information on sizes, measurements etc. I was just trying to match the overall design and the exact distance between the existing mounting screw holes in my door but as there was so little product information I had to do it by trial and error. . To help others who are in the same situation I have documented the details of…